Copy a key from a photograph
Taken from: http://www.i-hacked.com/content/view/264/48/
Picture this, You spot a keyring laying on a desk. You for whatever
reason would really like a copy of that key. Your ninja-like reflexes
kick in as you fling a quarter out of your pocket next to the key.
Slyly, you use nothing more than a cell phone camera, to quickly snap a
picture of these items.
Nobody noticed this because you are a
ninja, however there are plenty of ways for "normals" to make that
action next to unnoticeable. Even leaving the quarter there afterwards
may not raise much suspicion. Hell, Someone may even pocket it without
batting an eye.
Using the process outlined below, you can now duplicate this key for your own use!
| Print out this photograph. Compare it with a regular quarter to verify that you're seeing a 1:1 size ratio. If adjustment is needed, nothing as sophisticated as Photoshop comes into play... a simple xerox machine with zoom capability can handle things. |
 |
 |
 |
|
Take a bit of metal from an aluminum beverage can... perhaps a
folded segment, the double-thickness can provide added strength. Again,
this is an item that wouldn't ever look out of place at an office; many
|
| Insert the metal "key" that you have created into the lock. In
this case, i've used a basic desk drawer / filing cabinet lock. It may take a bit of finesse and jiggling, but most locks will accept the thin can metal without much trouble. Making a small crease longitudinally down the aluminum will often help prevent it from folding or crumpling. |
 |
| With a bit of jiggling and wiggling, often the lock will start to yield as wafers being to nestle into the necessary heights. Notice the black sharpie mark on the lock in the photos... the black marks line up in the "locked" position. |
 |
| The marks are now quite clearly out of alignment... due to the fact that the lock is open! |
 |
Some people may not think that simple aluminum has the strength to perform this trick. When experimenting with it, people suggested I also use a torsion wrench from a pick kit to aid in rotating the plug. I didn't need to, however. The lock opened just that easily. |
|
- Printer-friendly version
- Login or register to post comments
- Email this page
Have you tried this?
yup
And it worked? Oh
And it worked? Oh schnaps.
No I haven't. I've played around with soda can and metal detector strip bolt shims, but none of these. What kind of keys have you tried it on? I am not so sure it would work on house keys or anything, plus it looks like it'd bend too easily.
obviously
You didn't have to use the